Hohmtech Work² 18650 2547mAh max. 35,8A Lithium-Ionen-Battery NMC, 3,6V - 3,7V

Hohmtech Work² 18650 2547mAh max. 35,8A Lithium-Ionen-Battery NMC, 3,6V - 3,7V

SKU: 100843
GTIN: 734602845898
Category: 18650
Manufacturers: Hohmtech international

6,90 €

incl. 19% VAT , plus

From	Unit price
10	6,50 €*

Currently out of stock

Hohmtech Work² 18650 2547mAh max. 35,8A Lithium-Ionen-Battery NMC, 3,6V - 3,7V

Say hello to the successor of the Hohm Work 18650…we proudly introduce the updated Hohm Work2. Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 cell. These are rated at 2547mAh capacity, with a CDR of 25.3A, and 80oC | 2.8V cut-off @ 35.8A. For EV and DC motor applications, easily initial power with its 42.4A pulse/peak rating*6. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr*1, TID*2, PVDL*3, CLR*4 mΩR*5, and Temperature (°C). Hohm Work2 is built with a Cobalt Oxide with the proprietary melding of copper, aluminum, and ethylene carbonate chemistry concentration to achieve unprecedented capabilities.

Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies. This includes MSDS, CE, ROHS, UN38.3, IEC, Specifications, and Air/Sea Transport certifications. We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.

These cells are built specifically for intense & power-hungry devices that require consistent amperage delivery to operate as intended. Not only was power & capacity a priority, but safety measures were at the forefront of it all.

To expound on safety:

‌• modified cathode tag consisting of higher purity aluminum (UHP Al) is utilized to aid in lowering internal resistance
‌• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

* CAN BE CHARGED AT 3.82A. This is not a misprint. 3.82A as in THREE POINT EIGHT TWO amp charging is possible, tested, proven, and approved within all strict safety protocols set by YongDeli New Energy.
** TESTING BEYOND TEMPERATURE. Hohm Tech Int’l cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, internal resistance spread pre|post, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.
*** NOTICE: Hohm Tech Int’l does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving requirements set forth.

1 Density Loss Ratio

2 Thermal Image Distribution

3 Pulse Voltage Drop Limitation

4 Cycle Life Retention

5 Resistance Retentivity Pre/Post

6 Pulse & Peak is applicable to Dynamic EV Systems @ ≤5 SEC ON / ≥30 SEC OFF

Spec:

Capacity (mAh)/ Wh: 2547 / 9.17
Continuous Discharge Rate: 25.3A
Max Discharge Current: 35.8A
Energy Density (wt.): 193.1 Wh/kg
Energy Density (vol.): 554.4 Wh/l
Cycle Life Retention: 500 (69%)
Chemistry Type: QSP Li-NMC

Product safety information

Manufacturer information:

Hohm Tech International, LTD
Room 327/F., Ho King Commercial Centre, No. 2-16 fa yean St.
Mong Kok. Kowloon., Hongkong,
[email protected]
https://www.hohmtech.com

There are no reviews yet.

Contact data

E-Mail